Starts hostapd on selected ethernet ports and blocks all traffic, except the MAC addresses that get authenticated via the 802.1X protocol.

eth1x_auth.v2.tgz | 12 KB V2V2i

eth1x_auth.v3.tgz | 12 KB V3

eth1x_auth.v4.tgz | 12 KB V4

802.1X_Authenticator_Application_Note_20200708.pdf | 1 MB

Emulation of telephone modem behavior.

version.txt | 438 bytes V2V3V2i

atModemEmulator.v2.tgz | 30 KB V2V2i

atModemEmulator.v3.tgz | 29 KB V3

AT_Modem_Emulator_Application_Note_20200618.pdf | 1 MB

Allows Advantech routers to connect to Azure IoT (Microsoft’s end-to-end IoT platform). It is necessary to install the Python3 user module along with the Azure IoT SDK Python user module. Python3 is required for Azure IoT SDK Python to work – it is the separated module and it can be used as a standalone Python3 for other purposes.

azure_iot_sdk_python_v2.v2.tgz | 821 KB V2

azure_iot_sdk_python_v2.v3.tgz | 821 KB V3

azure_iot_sdk_python_v2.v4.tgz | 821 KB V4

Azure_IoT_SDK_Python_Application_note_20220307.pdf | 1 MB

Allow users to specify at least Primary and Backup APN for the first SIM card and switch between them in case that connection failed or connection is not established in specified time.

backup_apn.v2.tgz | 11 KB V2V2i

backup_apn.v3.tgz | 11 KB V3

backup_apn.v4.tgz | 11 KB V4

Backup_APN_Application_Note_20200630.pdf | 998 KB

Allows user to restrict the portfolio of frequency bands that are supported by our routers.

bandsel.v2.tgz | 28 KB V2V2i

bandsel.v3.tgz | 27 KB V3

bandsel.v4.tgz | 26 KB V4

BandSelect_Application_note_20211206.pdf | 984 KB

Bluetooth support with Bluez 5.55 and D-Bus 1.12.20. Currently intended only for ICR-3200 series.

bluetooth.v3.tgz | 1 MB V3

Bluetooth_Application_Note_20211014.pdf | 3 MB

With Bondix S.A.NE Enterprise two or more WAN connections can be aggregated to achieve higher bandwidth as well as higher availability.
The Bondix S.A.NE Enterprise uses bonding technology to optimize the speed and latency overall connections.

https://www.lucom.de/bondix-advantech.html  V2V3V4V2i

Provides a service called captive portal on routers. Landing page, QoS and monitoring of users on WiFi interface.

captive_portal.v2.tgz | 669 KB V2V2i

captive_portal.v3.tgz | 670 KB V3

captive_portal.v4.tgz | 694 KB V4

WelcomePageExample.tar.gz | 12 KB V2V3V4V2i

Captive_Portal_Application_note_20211118.pdf | 1 MB

Agent for Cumulocity IoT cloud platform.

cumulocity.v2.tgz | 1 MB V2V2i

cumulocity.v3.tgz | 1 MB V3

cumulocity.v4.tgz | 1 MB V4

Cumulocity_Agent_Application_note_20211014.pdf | 3 MB

Command line tool and library for transferring data with URLs. This is part of our FW since version 5.0.0!

curl.v2.tgz | 845 KB V2V2i

curl.v3.tgz | 845 KB V3

curl.v4.tgz | 862 KB V4

This module allows the user to change the logo displayed in the header of the web interface. This user module is supported by firmware 6.2.0 or later and is not supported by routers of the v2 platform.

customerlogo.v2.tgz | 10 KB V2V2i

customerlogo.v3.tgz | 10 KB V3

customerlogo.v4.tgz | 10 KB V4

Customer_Logo_Application_Note_20220125.pdf | 795 KB

Configurable daily router reboot.

dailyReboot.v2.tgz | 10 KB V2V2i

dailyReboot.v3.tgz | 10 KB V3

dailyReboot.v4.tgz | 10 KB V4

DailyReboot_Application_note_20200618.pdf | 976 KB

Allows only OUI in MAC field in router's DHCP configuration.

dhcpMacOui.v2.tgz | 11 KB V2V2i

dhcpMacOui.v3.tgz | 11 KB V3

dhcpMacOui.v4.tgz | 12 KB V4

This user module provides the DHCP relay agent to enable the communication from a DHCP server to DHCP clients on subnets other than the one the server resides on. It must be used together with route-based IPSec.

dhcp_relay.v2.tgz | 172 KB V2V2i

dhcp_relay.v3.tgz | 165 KB V3

DHCP_Relay_Application_Note_20211014.pdf | 1 MB

Allows the router I/Os to act like DNP3 slave device.

dnpOut.v2.tgz | 42 KB V2V2i

dnpOut.v3.tgz | 42 KB V3

DNP3_Outstation_Application_note_20200618.pdf | 1 MB

Docker is an open platform for developing, shipping, and running applications. Docker provides the ability to package and run an application in a loosely isolated environment called a container. This UM is compatible with FW 6.3.2 and newer.

docker.v3.tgz | 46 MB V3

docker.v4.tgz | 64 MB V4

Docker_Application_Note_20220616.pdf | 2 MB

Provides secure (encrypted) connection between two LAN networks.

easyVpn.v2.tgz | 659 KB V2V2i

easyVpn.v3.tgz | 672 KB V3

EasyVPNclient_Application_note_20200618.pdf | 1 MB

Ethernet Mirroring is used for port mirroring to monitor and analyze the incoming and outgoing traffic during RTU P2P test and trouble shooting. This UM is compatible with FW 6.1.8 and newer.

eth_mirror.v2.tgz | 11 KB V2V2i

eth_mirror.v3.tgz | 11 KB V3

eth_mirror.v4.tgz | 11 KB V4

Ethernet_Mirroring_Application_Note_20200618.pdf | 1010 KB

Detects physical disconnection of an Ethernet cable and drops eth0 interface.

ethernet_port.tgz | 327 KB V2V3V2i

Ethernet_Port_Detector_Application_note_20200618.pdf | 1 MB

Using this module, it is possible to send notifications (change of configuration, password change, login failed and much more) by e-mail or SNMP trap for various events. It is a useful tool to increase the security level of the system.

event_notificator.v2.tgz | 19 KB V2V2i

event_notificator.v3.tgz | 18 KB V3

event_notificator.v4.tgz | 19 KB V4

Event_Notificator_Application_Note_20211109.pdf | 990 KB

Adds the ability to create ext4 file systems, check them and mount them. This user module is intended only for v3 or v4 routers with FW 5.3.4 or newer.

ext4_tools.v3.tgz | 563 KB V3

ext4_tools.v4.tgz | 540 KB V4

Ext4_tools_Application_note_20211014.pdf | 952 KB

Periodic sending System log and Report files to the selected email address or FTP server.

fileUploader.v2.tgz | 863 KB V2V2i

fileUploader.v3.tgz | 871 KB V3

fileUploader.v4.tgz | 894 KB V4

File_Uploader_Application_note_20211014.pdf | 1 MB

Firmware Over-The-Air (FOTA) user module allows routers to wirelessly upgrade and update the operating firmware of a cellular module. The module's primary purpose is to update cellular module firmware for security or functional reasons. See the application note below for supported cellular modules and firmware available on the Advantech FOTA server.

fota.v2.tgz | 240 KB V2V2i

fota.v3.tgz | 229 KB V3

fota.v4.tgz | 247 KB V4

FOTA_Application_Note_20220419.pdf | 959 KB

FRRouting (FRR) user module is an Internet routing protocol suite for Advantech routers. This UM includes protocol daemons for BGP, IS-IS, LDP, OSPF, PIM, RIP, MPLS, LDP and VRF.

frr.v2.tgz | 3 MB V2V2i

frr.v3.tgz | 3 MB V3

frr.v4.tgz | 3 MB V4

FRR_Application_Note_20211014.pdf | 1 MB

You can use GDB to debug programs written in C, C++. GDB is invoked with the shell command gdb. Once started, it reads commands from the terminal until you tell it to exit with the GDB command quit. You can get online help from gdb itself by using the command help.

gdb.v2.tgz | 1 MB V2V2i

gdb.v3.tgz | 1 MB V3

GPS/GNSS receiver support.

gps.v2.tgz | 194 KB V2V2i

gps.v3.tgz | 186 KB V3

gps.v4.tgz | 190 KB V4

GPS_Application_note_20211014.pdf | 1 MB

Client that runs inside Advantech routers, to enable them to connect with SmartWorx Hub.

hmpclient.tgz | 574 KB V2V3V2i

Allows user to embed information banner ahead of the login form.

httpBanner.v2.tgz | 480 KB V2V2i

httpBanner.v3.tgz | 484 KB V3

httpBanner.v4.tgz | 506 KB V4

HTTP_Banner_Application_note_20200618.pdf | 975 KB

Layer-2 protocols in a pseudo-wire configuration.

l2tpPseudowire.v2.tgz | 12 KB V2V2i

l2tpPseudowire.v3.tgz | 12 KB V3

l2tpPseudowire.v4.tgz | 12 KB V4

Allows filtering based on defined list of MAC addresses.

l2fw.v2.tgz | 10 KB V2V2i

l2fw.v3.tgz | 10 KB V3

l2fw.v4.tgz | 10 KB V4

Layer_2_Firewall_Application_Note_20200618.pdf | 1023 KB

Virtual interface for management. 

loopback.v2.tgz | 9 KB V2V2i

loopback.v3.tgz | 9 KB V3

loopback.v4.tgz | 10 KB V4

Loopback_Application_Note_20200618.pdf | 1 MB

Supports scripting language that combines simple procedural syntax with powerful data description constructs based on associative arrays and extensible semantics.

lua.v2.tgz | 271 KB V2V2i

lua.v3.tgz | 267 KB V3

lua.v4.tgz | 264 KB V4

lualibmodbus.v2.tgz | 73 KB V2V2i

lualibmodbus.v3.tgz | 72 KB V3

lualibmodbus.v4.tgz | 76 KB V4

Midnight Commander is a visual file manager (console application with a text user interface). The main interface consists of two panels which display the file system. 

mc.v2.tgz | 224 KB V2V2i

mc.v3.tgz | 220 KB V3

Midnight_Commander_Application_Note_20211109.pdf | 1 MB

Reads Modbus RTU slaves and uploads data to FTP(S) server.

modbus_logger.v2.tgz | 22 KB V2V2i

modbus_logger.v3.tgz | 22 KB V3

Modbus_Logger_Application_note_20200618.pdf | 1 MB

Provides seamless communication between Modbus/TCP devices and LwM2M device.

ModbusToLwM2M.v2.tgz | 300 KB V2V3

Modbus_to_LwM2M_Application_Note_20200828.pdf | 1 MB

Provides seamless communication between Modbus/TCP devices and  MQTT device.

mb2mqtt.v2_2.0.16.tgz | 1010 KB V2V3

Modbus-MQTT_Application_Note_20220307.pdf | 1 MB

Message broker based on Mosquitto project. It supports MQTT protocol versions 5.0, 3.1.1 and 3.1.

mqttbroker.v2.tgz | 814 KB V2

mqttbroker.v3.tgz | 815 KB V3

mqttbroker.v4.tgz | 835 KB V4

Controlling and monitoring Advantech routers via the MQTT protocol. It is possible to send through a specific MQTT message which can, for example, change binary output. User can track status of the router by subscribing to a specific topic.

mqttmgr.v2.tgz | 666 KB V2V2i

mqttmgr.v3.tgz | 664 KB V3

mqttmgr.v4.tgz | 683 KB V4

MQTT_Manager_Application_Note_20220120.pdf | 1 MB

Extends NAT configuration options by SNAT (Source NAT) and DNAT (Destination NAT). There is 32 + 32 NAT rules.

nat.v2.tgz | 15 KB V2V2i

nat.v3.tgz | 15 KB V3

nat.v4.tgz | 15 KB V4

NAT_Application_Note_20220621.pdf | 934 KB

User module NetFlow/IPFIX is determined for monitoring network traffic. NetFlow enabled routers have a probe that collects IP traffic information and submits them to a NetFlow collector and analyzer.

netflow.v2.tgz | 537 KB V2V2i

netflow.v3.tgz | 533 KB V3

netflow.v4.tgz | 588 KB V4

NetFlow-IPFIX_Application_Note_20200729.pdf | 1 MB

This user module provides TCP and UDP scan.

nmap.v2.tgz | 395 KB V2V2i

nmap.v3.tgz | 1 MB V3

nmap.v4.tgz | 1 MB V4

NMAP_Application_note_20211014.pdf | 1 MB

Node-RED is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. This Router App contains Node-RED with some additional useful comon nodes. Other specialized nodes you can find in separated Router Apps.

Node-RED requires installed Node.js.

nodered.v3.tgz | 9 MB V3

nodered.v4.tgz | 9 MB V4

Node_RED_Application_Note_20220518.pdf | 7 MB

Adds a support for the AWS cloud to Node-RED. You will have the complex set of nodes for all Amazon cloud services after instalation. For detailed description see the Node-RED Application Note above.

noderedaws.v3.tgz | 2 MB V3

noderedaws.v4.tgz | 2 MB V4

Adds a support for the Azure IoT platform to Node-RED. It can connect to Azure IoT Hub, Azure IoT Central and use Azure IoT Edge as a transparant gateway. For detailed description see the Node-RED Application Note above.

noderedazure.v3.tgz | 2 MB V3

noderedazure.v4.tgz | 2 MB V4

Adds a support for the Bluetooth to Node-RED. You can scan BLE devices and read/write their service characteristics. For detailed description see the Node-RED Application Note above.

noderedbt.v3.tgz | 430 KB V3

noderedbt.v4.tgz | 430 KB V4

Adds a support for the Dashboard to Node-RED. You can create GUI for your flow with this node. For detailed description see the Node-RED Application Note above.

nodereddashboard.v3.tgz | 3 MB V3

nodereddashboard.v4.tgz | 3 MB V4

Adds a support for the dnp3 protocol to Node-RED. Router can work as a dnp3 outstation with the datapoints and control commands support. For detailed description see the Node-RED Application Note above.

nodereddnp3.v3.tgz | 618 KB V3

nodereddnp3.v4.tgz | 644 KB V4

Adds a support for the filesystem opearations: copy, move, create link, remove, make dir, list, stats, test access. For detailed description see the Node-RED Application Note above.

noderedfs.v3.tgz | 430 KB V3

noderedfs.v4.tgz | 429 KB V4

Adds a support for the FTP and SFTP protocols to Node-RED. You can do the basic commands LIST, GET, PUT, DELETE and MKDIR on a FTP or SSH server with this node. For detailed description see the Node-RED Application Note above.

noderedftp.v3.tgz | 273 KB V3

noderedftp.v4.tgz | 273 KB V4

Adds a support for the GNSS to Node-RED. GPSd node receives the GNSS events as payload via gpsd daemon. You can filter which events you are interested in. For detailed description see the Node-RED Application Note above.

noderedgpsd.v3.tgz | 8 KB V3

noderedgpsd.v4.tgz | 8 KB V4

Adds a support for the gzip compression to Node-RED. This node compresses an open node payload or decompress a compressed node payload by gzip compression. For detailed description see the Node-RED Application Note above.

noderedgzip.v3.tgz | 259 KB V3

noderedgzip.v4.tgz | 259 KB V4

Adds a support for the KNX protocol to Node-RED. Included nodes give you the control over your KNX intallation. For detailed description see the Node-RED Application Note above.

noderedknx.v3.tgz | 737 KB V3

noderedknx.v4.tgz | 737 KB V4

Adds a support for the Modbus protocol to Node-RED. Both protocol varianst TCP and RTU are supported. Your roter can act as both client (Modbus master) and the server (Modbus slave). For detailed description see the Node-RED Application Note above.

noderedmodbus.v3.tgz | 547 KB V3

noderedmodbus.v4.tgz | 547 KB V4

Adds a support for the OPC UA protocol to Node-RED. Your router can act as both a client and a server with these nodes. For detailed description see the Node-RED Application Note above.

noderedopcua.v3.tgz | 3 MB V3

noderedopcua.v4.tgz | 3 MB V4

Adds a support for the PLC EtherNet/IP protocol to Node-RED. Your flow can communicate with the Allen Bradley/Rockwell PLCs over Ethernet with these nodes. For detailed description see the Node-RED Application Note above.

noderedplcethip.v3.tgz | 48 KB V3

noderedplcethip.v4.tgz | 48 KB V4

Adds a support for the PLC Melsec protocol to Node-RED. Your flow can communicate with the Mitsubishi PLCs over Ethernet with these nodes. For detailed description see the Node-RED Application Note above.

noderedplcmc.v3.tgz | 42 KB V3

noderedplcmc.v4.tgz | 42 KB V4

Adds a support for the Splunk cloud to Node-RED. Allows to publish a node payload to Splunk's HTTP Event Collector. For detailed description see the Node-RED Application Note above.

noderedsplunk.v3.tgz | 234 KB V3

noderedsplunk.v4.tgz | 234 KB V4

Node.js is a JavaScript runtime built on Chrome's V8 JavaScript engine. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient.

nodejs.v3.tgz | 11 MB V3

nodejs.v4.tgz | 11 MB V4

Node.js_Application_Note_20220518.pdf | 955 KB

Time synchronization using NTP version 4 protocol. The module includes support for client and server operations as detailed in IETF RFC 5905.

ntp.v2.tgz | 578 KB V2V2i

ntp.v3.tgz | 570 KB V3

ntp.v4.tgz | 575 KB V4

NTPv4_Application_Note_20210510.pdf | 957 KB

Gains a more accurate location via Ntrip protocol. Each router which has enabled the user module can be considered as Ntrip Client.

ntripClient.v2.tgz | 30 KB V2V2i

ntripClient.v3.tgz | 30 KB V3

NtripClient_Application_note_20200618.pdf | 1 MB

OpenVPN Custom Config user module can be used to configure up to four another OpenVPN tunnels on the router.

openvpn_custom_config.v2.tgz | 11 KB V2V2i

openvpn_custom_config.v3.tgz | 11 KB V3

openvpn_custom_config.v4.tgz | 11 KB V4

OpenVPN_Custom_Config_Application_note_20200618.pdf | 1 MB

Allows to run one resettable and one non-resettable time counter for each binary input of the router.

ophrscounter.v2.tgz | 20 KB V2V2i

ophrscounter.v3.tgz | 20 KB V3

Operational_Hours_Counter_Application_note_20200618.pdf | 976 KB

Duplicates data flow to more targets (up to seven different connections).

packetSplitter.v2.tgz | 20 KB V2V2i

packetSplitter.v3.tgz | 19 KB V3

packetSplitter.v4.tgz | 20 KB V4

Packet_Splitter_Application_note_20200618.pdf | 1 MB

Allows to send SMS messages longer than standard of 160 characters.

pduSMS.v2.tgz | 10 KB V2V2i

pduSMS.v3.tgz | 10 KB V3

pduSMS.v4.tgz | 11 KB V4

pduSMS_Application_note_20200618.pdf | 1016 KB

Automatically verifies functionality of the connection between the router and a peer device and collects statistics on this connection. Also provides the ping and traceroute tools in the web UI.

pinger.v2.tgz | 35 KB V2V2i

pinger.v3.tgz | 35 KB V3

pinger.v4.tgz | 34 KB V4

UM-PINGER-MIB.my | 5 KB V2V3V4V2i

Pinger_Application_Note_20220516.pdf | 2 MB

PLMN Whitelist allows user to edit preferred PLMN lists on SIM card.

plmnWhitelist.v2.tgz | 15 KB V2V2i

plmnWhitelist.v3.tgz | 14 KB V3

plmnWhitelist.v4.tgz | 15 KB V4

Establishes connection via PPP between router and device on serial line.

pppGateway.v2.tgz | 12 KB V2V2i

pppGateway.v3.tgz | 12 KB V3

PPPGateway_Application_note_20200618.pdf | 1 MB

Converts data from Mitsubishi ALPHA2 to Modbus TCP.

alpha.v2.tgz | 38 KB V2V2i

alpha.v3.tgz | 38 KB V3

ALPHA-MODBUS_application_note_20200618.pdf | 1 MB

Adds support of the BGP routing protocol which allows to route between autonomous systems.

bgp.v2.tgz | 466 KB V2V2i

bgp.v3.tgz | 461 KB V3

bgp.v4.tgz | 467 KB V4

BGP_Application_note_20211015.pdf | 1 MB

Converts DF1 serial protocol to TCP/IP.

abcsp2df1.v2.tgz | 38 KB V2V2i

abcsp2df1.v3.tgz | 38 KB V3

DF1-Ethernet_Application_note_20200618.pdf | 972 KB

Converts IEC101 serial protocol to IEC104 IP protocol.

iec14.v2.tgz | 43 KB V2V2i

iec14.v3.tgz | 43 KB V3

Protocol_IEC_101-104_Application_Note_20200618.pdf | 1 MB

Adds support of the IS-IS routing protocol. The IS-IS is a link state protocol which means that information about the topology is exchanged between the nearest neighbours in a flood way (flooding).

isis.v2.tgz | 352 KB V2V2i

isis.v3.tgz | 347 KB V3

isis.v4.tgz | 352 KB V4

IS-IS_Application_note_20211015.pdf | 1 MB

Converts Modbus RTU messages to TCP and caching messages to external Flash memory.

rtu2tcp.v2.tgz | 20 KB V2V2i

rtu2tcp.v3.tgz | 19 KB V3

Modbus_RTU2TCP_Application_note_20200618.pdf | 2 MB

Converts serial protocol Modbus RTU from more Modbus slaves and mapping their data to one Modbus TCP connection.

rtuMap.v2.tgz | 19 KB V2V2i

rtuMap.v3.tgz | 18 KB V3

RTUMAP_Application_note_20200618.pdf | 1 MB

Converts serial protocol Modbus RTU to Modbus TCP, routers I/Os can act like Modbus slave device.

tcp2rtu.v2.tgz | 28 KB V2V2i

tcp2rtu.v3.tgz | 26 KB V3

tcp2rtu.v4.tgz | 27 KB V4

Modbus_TCP2RTU_Application_note_20220317.pdf | 843 KB

The Next Hop Resolution Protocol (NHRP) plays a role in Dynamic Multipoint Virtual Private Network. A limitation of NHRP is its inability to improve multicast protocols.

nhrp.v2.tgz | 71 KB V2V2i

nhrp.v3.tgz | 70 KB V3

nhrp.v4.tgz | 71 KB V4

DMVPN_Application_Note_20181129.pdf | 1 MB

Adds support of the OSPF routing protocol. The OSPF is a link state protocol which means that routers maintain a map of the network (link state database) that is updated after any change to the network topology.

ospf.v2.tgz | 407 KB V2V2i

ospf.v3.tgz | 402 KB V3

ospf.v4.tgz | 406 KB V4

OSPF_Application_note_20211015.pdf | 1 MB

Adds support of the PIM-SM multicast routing protocol.

pimSM.v2.tgz | 66 KB V2V2i

pimSM.v3.tgz | 63 KB V3

pimSM.v4.tgz | 66 KB V4

PIM-SM_Application_note_20211015.pdf | 1 MB

Adds support of the RIP routing protocol. The RIP is a distance-vector protocol which means that routers do not know the entire network topology.

rip.v2.tgz | 306 KB V2V2i

rip.v3.tgz | 304 KB V3

rip.v4.tgz | 308 KB V4

RIP_Application_note_20211015.pdf | 1 MB

Supports programming language Python 2.x. This UM requires at least 8 MB of free space for installation "Router Apps". 

python.v2.tgz | 5 MB V2V2i

python.v3.tgz | 5 MB V3

python.v4.tgz | 5 MB V4

Supports programming language Python 3.x. This UM requires at least 8 MB of free space for installation "Router Apps".

python3.v2.tgz | 6 MB V2V2i

python3.v3.tgz | 6 MB V3

python3.v4.tgz | 7 MB V4

Supports programming language Python 3.x with pip (tool for installing and managing software packages written in Python). This UM supports only packages that does not require any additional compilation. It is required at least 10 MB of free space for installation "Router Apps".

python3_with_pip.v2.tgz | 8 MB V2

python3_with_pip.v3.tgz | 8 MB V3

python3_with_pip.v4.tgz | 8 MB V4

Windows Share (samba) on the Router for directory /var/data/samba. The UM also supports NetBIOS nameserver.

samba.v2.tgz | 6 MB V2V2i

samba.v3.tgz | 6 MB V3

samba.v4.tgz | 6 MB V4

The Scailable AI Manager turns your gateway into a state of the art Artificial Intelligence device. Connect up to 4 cameras to your gateway, and start benefiting from edge AI today. With our extended model library, you can use your gateway to accurately locate people, monitor occupancy of your parking-lot, do entrance control, and much more. And if that’s not enough, you can add your own AI models effortlessly.

https://www.scailable.net/routerapp  V3V4

SCEP is a PKI communication protocol. The goal of SCEP is to support the secure issuance of certificates to network devices in a scalable manner, using existing technology whenever possible.

scepClient.v2.tgz | 495 KB V2V2i

scepClient.v3.tgz | 498 KB V3

scepClient.v4.tgz | 515 KB V4

SCEP_Client_Application_note_20211005.pdf | 1 MB

The module implements an enhanced syslog client (sender) that can forward syslog messages to a server (receiver) over a secure TLS protocol as defined in RFC 5425.

secure_syslog.v2.tgz | 1 MB V2V2i

secure_syslog.v3.tgz | 1 MB V3

secure_syslog.v4.tgz | 1 MB V4

SecureSyslog_Application_Note_20211015.pdf | 1 MB

Regular sending of System log and Report files to the specified email or FTP server.

sendReport.v2.tgz | 64 KB V2V2i

sendReport.v3.tgz | 63 KB V3

SendReport_Application_note_20211015.pdf | 1002 KB

This module provides a way for a user to connect from a network connection to a serial port.

ser2net.v2.tgz | 51 KB V2V2i

ser2net.v3.tgz | 51 KB V3

Serial_to_network_proxy_App_note_20200618.pdf | 1017 KB V2V3V2i

Allows connecting of the serial line device and TCP Server or Servers. Communication in both ways – serial to TCP and TCP to serial – is possible.

serial2tcp.v2.tgz | 20 KB V2V2i

serial2tcp.v3.tgz | 19 KB V3

Serial2TCP_Application_note_20200618.pdf | 1 MB

Service Access Limitation of HTTP, FTP, SSH... on particular interfaces.

service_acl.v2.tgz | 12 KB V2V2i

service_acl.v3.tgz | 12 KB V3

service_acl.v4.tgz | 12 KB V4

Switch the router into Low Power Mode and wake it up. Advanced options based on binary inputs and time.

sleepmode.v3.tgz | 14 KB V3

sleepmode.v4.tgz | 14 KB V4

Sleep_Mode_Application_Note_20200618.pdf | 845 KB

Adds the ability to use the router as an SSH client. This means that the module allows to establish the SSH connection to the remote router and execute commands on it.

sshclient.tgz | 180 KB V2V3V2i

SSHclient_Application_note_20200618.pdf | 1 MB

Creates an encrypted network tunnel. Encryption data is wrapped in SSL.

stunnel.v2.tgz | 1 MB V2V2i

stunnel.v3.tgz | 1 MB V3

stunnel.v4.tgz | 1 MB V4

Stunnel_Application_note_20211109.pdf | 1 MB

Check of the TCP connection with a defined IP address.

tcpsynka.v2.tgz | 12 KB V2V2i

tcpsynka.v3.tgz | 12 KB V3

tcpsynka.v4.tgz | 12 KB V4

TCP_SYN_Keep-Alive_Application_note_20200618.pdf | 1016 KB

An application layer protocol for remote router monitoring and management.

tr_069.v2.tgz | 2 MB V2V2i

tr_069.v3.tgz | 2 MB V3

tr_069.v4.tgz | 2 MB V4

TR_069_Application_Note_20220428.pdf | 2 MB

Mobile WAN IP address is transferred to connected device on ETH (router is invisible from WAN side).

transparentMode.v2.tgz | 2 KB V2V2i

transparentMode.v3.tgz | 2 KB V3

transparentMode.v4.tgz | 2 KB V4

TransparentMode_Application_note_20220419.pdf | 1 MB

Checks the specific UDP packet responses in Smart Router and if no responses come back, switches the PPP (cellular) connection to other SIM card in the Smart Router.

udp_watchdog.v2.tgz | 13 KB V2V2i

udp_watchdog.v3.tgz | 13 KB V3

udp_watchdog.v4.tgz | 13 KB V4

UDP_Communication_Watchdog_Application_Note_20210302.pdf | 1 MB

This user module can be used for blocking specific URLs on WiFi interface.

url_blocker.v2.tgz | 188 KB V2V2i

url_blocker.v3.tgz | 184 KB V3

url_blocker.v4.tgz | 188 KB V4

URL_Blocker_Application_Note_20211015.pdf | 1 MB

Integrates Eltima libraries into USB over Ethernet solution. This Router App is only supported by firmware 6.3.5 or newer.

usbip_electronic_team.v2.tgz | 3 MB V2V2i

usbip_electronic_team.v3.tgz | 3 MB V3

usbip_electronic_team.v4.tgz | 4 MB V4

USB over IP _Electronic Team__Application_Note_20210621.pdf | 1 MB

Universal UM for USR LED control - indication of various status informations.

usrled_mgmt.v2.tgz | 13 KB V2V2i

usrled_mgmt.v3.tgz | 12 KB V3

usrled_mgmt.v4.tgz | 13 KB V4

USR_LED_Management_Application_Note_20212104.pdf | 3 MB

Vim is a highly configurable text editor for efficiently creating and changing any kind of text.

vim.v2.tgz | 355 KB V2V2i

vim.v3.tgz | 354 KB V3

vVim_Application_Note_20211109.pdf | 1 MB

Connects the router to WebAccess/VPN (VPN Portal), see WebAccess/VPN Software product page.Note for compatibility: always use the same version of user module in router and server version of WebAccess/VPN.

vpnportal.um.v2.tgz | 409 KB V2

vpnportal.um.v3.tgz | 407 KB V3

vpnportal.um.v4.tgz | 482 KB V4

This user module allows executing of shell commands on a router over standard HTTP(S) connection.

webTerm.v2.tgz | 33 KB V2V2i

webTerm.v3.tgz | 32 KB V3

webTerm.v4.tgz | 33 KB V4

web_terminal_application_note_20220110.pdf | 1 MB

Client that runs inside Advantech routers, to enable them to connect with WebAccess/DMP. Read the Release Notes/Changelog in WebAccess/DMP Documentation.

wadmp_client.v2.tgz | 553 KB V2V2i

wadmp_client.v3.tgz | 547 KB V3

wadmp_client.v4.tgz | 567 KB V4

WebAccess_DMP_Client_Application_Note_20211125.pdf | 1 MB

Allows the router to switch automatically between up to four SSIDs – WiFi networks.

wifi_ssid_switch.v2.tgz | 18 KB V2V2i

wifi_ssid_switch.v3.tgz | 18 KB V3

WiFi_SSID_Switch_Application_Note_20200618.pdf | 1 MB

Transparent mode (WiFi interface in client mode bridged to ETH).

wifi_relay.v2.tgz | 28 KB V2V2i

wifi_relay.v3.tgz | 28 KB V3

wifi_relay.v4.tgz | 29 KB V4

WiFi_STA_Relay_Application_Note_20210531.pdf | 1 MB

Data processing from Wireless M-Bus meters. XML files are used for this purpose.

wMBusConc.v2.tgz | 18 KB V2

wMBusConc.v3.tgz | 17 KB V3

wM-BUS_Concentrator_Application_note_20200618.pdf | 1 MB

Listens to communication on the selected UDP port and forward these packets to appropriate address as a broadcast.

WoLGateway.v2.tgz | 12 KB V2V2i

WoLGateway.v3.tgz | 12 KB V3

WoL_Gateway_Application_note_20200618.pdf | 1019 KB

Allows to reconfigure CNT board directly inside of router (intended for v2 routers only). There are three possible congurations:

• 4x BI
• 3x BI + 1x CNT
• 2x BI + 2x CNT

xccnt_update.v2.tgz | 35 KB V2

XC_CNT_Update__Application_Note_20211020.pdf | 952 KB

This is UM can be used as a SW agent for Advantech routers to support Zabbix network monitoring platform.

zabbix_agent.v2.tgz | 928 KB V2V2i

zabbix_agent.v3.tgz | 930 KB V3

zabbix_agent.v4.tgz | 953 KB V4

zbx_conel_templates.xml | 59 KB V2V3V4V2i

Zabbix_Integration_Guide_Application_Note_20211015.pdf | 2 MB