Starts hostapd on selected ethernet ports and blocks all traffic, except the MAC addresses that get authenticated via the 802.1X protocol.

eth1x_auth.v2.tgz | 12 KB V2V2i

802.1X_Authenticator_Application_Note_20220830.pdf | 949 KB

Emulation of telephone modem behavior.

version.txt | 438 bytes V2V3V2i

atModemEmulator.v2.tgz | 30 KB V2V2i

AT_Modem_Emulator_Application_Note_20220901.pdf | 1 MB

Allow users to specify at least Primary and Backup APN for the first SIM card and switch between them in case that connection failed or connection is not established in specified time.

backup_apn.v2.tgz | 11 KB V2V2i

Backup_APN_Application_Note_20220901.pdf | 924 KB

Allows user to restrict the portfolio of frequency bands that are supported by our routers.

bandsel.v2.tgz | 27 KB V2V2i

BandSelect_Application_Note_20220901.pdf | 927 KB

With Bondix S.A.NE Enterprise two or more WAN connections can be aggregated to achieve higher bandwidth as well as higher availability.
The Bondix S.A.NE Enterprise uses bonding technology to optimize the speed and latency overall connections.

https://www.lucom.de/bondix-advantech.html  V2V3V4V2i

Provides a service called captive portal on routers. Landing page, QoS and monitoring of users on WiFi interface.

captive_portal.v2.tgz | 669 KB V2V2i

WelcomePageExample.tar.gz | 12 KB V2V3V4V2i

Captive_Portal_Application_note_20220901.pdf | 1 MB

Agent for Cumulocity IoT cloud platform.

cumulocity.v2.tgz | 1 MB V2V2i

Cumulocity_Agent_Application_note_20220901.pdf | 2 MB

Command line tool and library for transferring data with URLs. This is part of our FW since version 5.0.0!

curl.v2.tgz | 845 KB V2V2i

This module allows the user to change the logo displayed in the header of the web interface. This user module is supported by firmware 6.2.0 or later and is not supported by routers of the v2 platform.

customerlogo.v2.tgz | 10 KB V2V2i

Customer_Logo_Application_Note_20220901.pdf | 812 KB

Configurable daily router reboot.

dailyReboot.v2.tgz | 10 KB V2V2i

DailyReboot_Application_note_20220901.pdf | 885 KB

Allows only OUI in MAC field in router's DHCP configuration.

dhcpMacOui.v2.tgz | 11 KB V2V2i

This user module provides the DHCP relay agent to enable the communication from a DHCP server to DHCP clients on subnets other than the one the server resides on. It must be used together with route-based IPSec.

dhcp_relay.v2.tgz | 172 KB V2V2i

DHCP_Relay_Application_Note_20220901.pdf | 1 MB

Allows the router I/Os to act like DNP3 slave device.

dnpOut.v2.tgz | 42 KB V2V2i

DNP3_Outstation_Application_note_20220901.pdf | 1 MB

Provides secure (encrypted) connection between two LAN networks.

easyVpn.v2.tgz | 659 KB V2V2i

EasyVPNclient_Application_note_20220901.pdf | 952 KB

Ethernet Mirroring is used for port mirroring to monitor and analyze the incoming and outgoing traffic during RTU P2P test and trouble shooting. This UM is compatible with FW 6.1.8 and newer.

eth_mirror.v2.tgz | 11 KB V2V2i

Ethernet_Mirroring_Application_Note_20220901.pdf | 930 KB

Detects physical disconnection of an Ethernet cable and drops eth0 interface.

ethernet_port.tgz | 327 KB V2V3V2i

Ethernet_Port_Detector_Application_note_20220901.pdf | 1 MB

Using this module, it is possible to send notifications (change of configuration, password change, login failed and much more) by e-mail or SNMP trap for various events. It is a useful tool to increase the security level of the system.

event_notificator.v2.tgz | 19 KB V2V2i

Event_Notificator_Application_Note_20220901.pdf | 916 KB

Periodic sending System log and Report files to the selected email address or FTP server.

fileUploader.v2.tgz | 863 KB V2V2i

File_Uploader_Application_note_20220901.pdf | 1 MB

Firmware Over-The-Air (FOTA) user module allows routers to wirelessly upgrade and update the operating firmware of a cellular module. The module's primary purpose is to update cellular module firmware for security or functional reasons. See the application note below for supported cellular modules and firmware available on the Advantech FOTA server.

fota.v2.tgz | 240 KB V2V2i

FOTA_Application_Note_20220901.pdf | 910 KB

FRRouting (FRR) user module is an Internet routing protocol suite for Advantech routers. This UM includes protocol daemons for BGP, IS-IS, LDP, OSPF, PIM, RIP, MPLS, LDP and VRF.

FRR_Application_Note_20220901.pdf | 999 KB

You can use GDB to debug programs written in C, C++. GDB is invoked with the shell command gdb. Once started, it reads commands from the terminal until you tell it to exit with the GDB command quit. You can get online help from gdb itself by using the command help.

gdb.v2.tgz | 1 MB V2V2i

GPS/GNSS receiver support.

gps.v2.tgz | 194 KB V2V2i

GPS_Application_note_20220901.pdf | 999 KB

Client that runs inside Advantech routers, to enable them to connect with SmartWorx Hub.

hmpclient.tgz | 574 KB V2V3V2i

Allows users to embed information banner ahead of the login form.
Please note: This functionality is now part of the firmware - from version 6.3.7.

httpBanner.v2.tgz | 480 KB V2V2i

HTTP_Banner_Application_note_20220901.pdf | 882 KB

Layer-2 protocols in a pseudo-wire configuration.

l2tpPseudowire.v2.tgz | 12 KB V2V2i

Allows filtering based on defined list of MAC addresses.

l2fw.v2.tgz | 10 KB V2V2i

Layer_2_Firewall_Application_Note_20220901.pdf | 890 KB

Virtual interface for management. 

loopback.v2.tgz | 9 KB V2V2i

Loopback_Application_Note_20220901.pdf | 905 KB

Supports scripting language that combines simple procedural syntax with powerful data description constructs based on associative arrays and extensible semantics.

lua.v2.tgz | 271 KB V2V2i

lualibmodbus.v2.tgz | 73 KB V2V2i

Midnight Commander is a visual file manager (console application with a text user interface). The main interface consists of two panels which display the file system. 

mc.v2.tgz | 224 KB V2V2i

Midnight_Commander_Application_Note_20220905.pdf | 1005 KB

Reads Modbus RTU slaves and uploads data to FTP(S) server.

modbus_logger.v2.tgz | 22 KB V2V2i

Modbus_Logger_Application_Note_20220905.pdf | 998 KB

Provides seamless communication between Modbus/TCP devices and MQTT device.

mb2mqtt.v2_2.0.19_20230201T053911Z.tgz | 1017 KB V2V3V4V2i

Controlling and monitoring Advantech routers via the MQTT protocol. It is possible to send through a specific MQTT message which can, for example, change binary output. User can track status of the router by subscribing to a specific topic.

mqttmgr.v2.tgz | 666 KB V2V2i

MQTT_Manager_Application_Note_20220905.pdf | 1 MB

Extends NAT configuration options by SNAT (Source NAT) and DNAT (Destination NAT). There is 32 + 32 NAT rules.

nat.v2.tgz | 15 KB V2V2i

User module NetFlow/IPFIX is determined for monitoring network traffic. NetFlow enabled routers have a probe that collects IP traffic information and submits them to a NetFlow collector and analyzer.

netflow.v2.tgz | 537 KB V2V2i

NetFlow-IPFIX_Application_Note_20220905.pdf | 1 MB

This user module provides TCP and UDP scan.

nmap.v2.tgz | 395 KB V2V2i

NMAP_Application_note_20220907.pdf | 1 MB

Time synchronization using NTP version 4 protocol. The module includes support for client and server operations as detailed in IETF RFC 5905.

ntp.v2.tgz | 578 KB V2V2i

NTPv4_Application_Note_20220907.pdf | 879 KB

Gains a more accurate location via Ntrip protocol. Each router which has enabled the user module can be considered as Ntrip Client.

ntripClient.v2.tgz | 30 KB V2V2i

NtripClient_Application_note_20220907.pdf | 1 MB

OpenVPN Custom Config user module can be used to configure up to four another OpenVPN tunnels on the router.

openvpn_custom_config.v2.tgz | 11 KB V2V2i

OpenVPN_Custom_Config_Application_note_20220908.pdf | 983 KB

Allows to run one resettable and one non-resettable time counter for each binary input of the router.

ophrscounter.v2.tgz | 20 KB V2V2i

Operational_Hours_Counter_Application_note_20220908.pdf | 879 KB

Duplicates data flow to more targets (up to seven different connections).

packetSplitter.v2.tgz | 20 KB V2V2i

Packet_Splitter_Application_note_20220908.pdf | 1 MB

Allows to send SMS messages longer than standard of 160 characters.

pduSMS.v2.tgz | 10 KB V2V2i

pduSMS_Application_note_20220908.pdf | 924 KB

Automatically verifies functionality of the connection between the router and a peer device and collects statistics on this connection. Also provides the ping and traceroute tools in the web UI.

pinger.v2.tgz | 35 KB V2V2i

UM-PINGER-MIB.my | 5 KB V2V3V4V2i

Pinger_Application_Note_20220908.pdf | 2 MB

PLMN Whitelist allows user to edit preferred PLMN lists on SIM card.

plmnWhitelist.v2.tgz | 15 KB V2V2i

Establishes connection via PPP between router and device on serial line.

pppGateway.v2.tgz | 12 KB V2V2i

PPPGateway_Application_note_20220908.pdf | 1 MB

Converts data from Mitsubishi ALPHA2 to Modbus TCP.

alpha.v2.tgz | 38 KB V2V2i

ALPHA-MODBUS_application_note_20200618.pdf | 1 MB

Adds support of the BGP routing protocol which allows to route between autonomous systems.

bgp.v2.tgz | 466 KB V2V2i

Protocol_BGP_Application_note_20220908.pdf | 1 MB

Converts DF1 serial protocol to TCP/IP.

abcsp2df1.v2.tgz | 38 KB V2V2i

Protocol_DF1-Ethernet_Application_note_20220908.pdf | 914 KB

Converts IEC101 serial protocol to IEC104 IP protocol.

iec14.v2.tgz | 43 KB V2V2i

Protocol_IEC_101-104_Application_Note_20220908.pdf | 1002 KB

Adds support of the IS-IS routing protocol. The IS-IS is a link state protocol which means that information about the topology is exchanged between the nearest neighbours in a flood way (flooding).

isis.v2.tgz | 352 KB V2V2i

Protocol_IS-IS_Application_note_20220908.pdf | 957 KB

Converts Modbus RTU messages to TCP and caching messages to external Flash memory.

rtu2tcp.v2.tgz | 20 KB V2V2i

Protocol_Modbus_RTU2TCP_Application_note_20220909.pdf | 2 MB

Converts serial protocol Modbus RTU from more Modbus slaves and mapping their data to one Modbus TCP connection.

rtuMap.v2.tgz | 19 KB V2V2i

Protocol_Modbus_RTUMAP_Application_note_20220927.pdf | 1018 KB

Converts serial protocol Modbus RTU to Modbus TCP, routers I/Os can act like Modbus slave device.

tcp2rtu.v2.tgz | 38 KB V2V2i

Protocol_Modbus_TCP2RTU_Application_note_20220909.pdf | 845 KB

The Next Hop Resolution Protocol (NHRP) plays a role in Dynamic Multipoint Virtual Private Network. A limitation of NHRP is its inability to improve multicast protocols.

nhrp.v2.tgz | 71 KB V2V2i

DMVPN_Application_Note_20221004.pdf | 1 MB

Adds support of the OSPF routing protocol. The OSPF is a link state protocol which means that routers maintain a map of the network (link state database) that is updated after any change to the network topology.

ospf.v2.tgz | 407 KB V2V2i

Protocol_OSPF_Application_note_20220927.pdf | 1 MB

Adds support of the PIM-SM multicast routing protocol.

pimSM.v2.tgz | 66 KB V2V2i

Protocol_PIM-SM_Application_note_20220927.pdf | 995 KB

Adds support of the RIP routing protocol. The RIP is a distance-vector protocol which means that routers do not know the entire network topology.

rip.v2.tgz | 306 KB V2V2i

Protocol_RIP_Application_note_20220927.pdf | 1 MB

Supports programming language Python 2.x. This UM requires at least 8 MB of free space for installation "Router Apps". 

python.v2.tgz | 5 MB V2V2i

Supports programming language Python 3.x. This UM requires at least 8 MB of free space for installation "Router Apps".

python3.v2.tgz | 27 MB V2V2i

Windows Share (samba) on the Router for directory /var/data/samba. The UM also supports NetBIOS nameserver.

samba.v2.tgz | 6 MB V2V2i

SCEP is a PKI communication protocol. The goal of SCEP is to support the secure issuance of certificates to network devices in a scalable manner, using existing technology whenever possible.

scepClient.v2.tgz | 495 KB V2V2i

SCEP_Client_Application_note_20220927.pdf | 974 KB

The module implements an enhanced syslog client (sender) that can forward syslog messages to a server (receiver) over a secure TLS protocol as defined in RFC 5425.

secure_syslog.v2.tgz | 1 MB V2V2i

SecureSyslog_Application_Note_20220927.pdf | 1001 KB

Regular sending of System log and Report files to the specified email or FTP server.

sendReport.v2.tgz | 64 KB V2V2i

SendReport_Application_note_20220927.pdf | 925 KB

This module provides a way for a user to connect from a network connection to a serial port.

ser2net.v2.tgz | 51 KB V2V2i

Serial_to_network_proxy_App_note_20221004.pdf | 886 KB V2V3V2i

Allows connecting of the serial line device and TCP Server or Servers. Communication in both ways – serial to TCP and TCP to serial – is possible.

serial2tcp.v2.tgz | 20 KB V2V2i

Serial2TCP_Application_note_20220927.pdf | 992 KB

Service Access Limitation of HTTP, FTP, SSH... on particular interfaces.

service_acl.v2.tgz | 12 KB V2V2i

Adds the ability to use the router as an SSH client. This means that the module allows to establish the SSH connection to the remote router and execute commands on it.

sshclient.tgz | 180 KB V2V3V2i

SSHclient_Application_note_20220927.pdf | 1 MB

Creates an encrypted network tunnel. Encryption data is wrapped in SSL.

stunnel.v2.tgz | 1 MB V2V2i

Stunnel_Application_note_20220927.pdf | 1 MB

Check of the TCP connection with a defined IP address.

tcpsynka.v2.tgz | 12 KB V2V2i

TCP_SYN_Keep-Alive_Application_note_20220927.pdf | 910 KB

An application layer protocol for remote router monitoring and management.

tr_069.v2.tgz | 2 MB V2V2i

TR-069_Application_Note_20220927.pdf | 2 MB

Mobile WAN IP address is transferred to connected device on ETH (router is invisible from WAN side).

transparentMode.v2.tgz | 2 KB V2V2i

TransparentMode_Application_note_20220927.pdf | 1 MB

Checks the specific UDP packet responses in Smart Router and if no responses come back, switches the PPP (cellular) connection to other SIM card in the Smart Router.

udp_watchdog.v2.tgz | 13 KB V2V2i

UDP_Communication_Watchdog_Application_Note_20220927.pdf | 994 KB

This user module can be used for blocking specific URLs on WiFi interface.

url_blocker.v2.tgz | 188 KB V2V2i

URL_Blocker_Application_Note_20220927.pdf | 950 KB

Integrates Eltima libraries into USB over Ethernet solution. This Router App is only supported by firmware 6.3.5 or newer.

usbip_electronic_team.v2.tgz | 3 MB V2V2i

USB over IP (Electronic Team)_Application_Note_20221004.pdf | 1 MB

Universal UM for USR LED control - indication of various status informations.

usrled_mgmt.v2.tgz | 13 KB V2V2i

USR_LED_Management_Application_Note_20221004.pdf | 2 MB

Vim is a highly configurable text editor for efficiently creating and changing any kind of text.

vim.v2.tgz | 355 KB V2V2i

Vim_Application_Note_20221004.pdf | 959 KB

This user module allows executing of shell commands on a router over standard HTTP(S) connection.

webTerm.v2.tgz | 33 KB V2V2i

Web_Terminal_Application_Note_20221004.pdf | 944 KB

Client that runs inside Advantech routers, to enable them to connect with WebAccess/DMP. Read the Release Notes/Changelog in WebAccess/DMP Documentation.

wadmp_client.v2.tgz | 575 KB V2V2i

WebAccess-DMP_Client_Application_Note_20221004.pdf | 949 KB

Allows the router to switch automatically between up to four SSIDs – WiFi networks.

wifi_ssid_switch.v2.tgz | 18 KB V2V2i

WiFi_SSID_Switch_Application_Note_20221004.pdf | 1 MB

Transparent mode (WiFi interface in client mode bridged to ETH).

wifi_relay.v2.tgz | 28 KB V2V2i

WiFi_STA_Relay_Application_Note_20221004.pdf | 977 KB

Listens to communication on the selected UDP port and forward these packets to appropriate address as a broadcast.

WoLGateway.v2.tgz | 12 KB V2V2i

WoL_Gateway_Application_note_20221004.pdf | 934 KB

This is UM can be used as a SW agent for Advantech routers to support Zabbix network monitoring platform.

zabbix_agent.v2.tgz | 928 KB V2V2i

zbx_conel_templates.xml | 59 KB V2V3V4V2i

Zabbix_Integration_Guide_Application_Note_20221004.pdf | 2 MB