Starts hostapd on selected ethernet ports and blocks all traffic, except the MAC addresses that get authenticated via the 802.1X protocol.

eth1x_auth.v4.tgz | 12 KB V4

802.1X_Authenticator_Application_Note_20220830.pdf | 949 KB

Allows Advantech routers to connect to Azure IoT (Microsoft’s end-to-end IoT platform). It is necessary to install the Python3 user module along with the Azure IoT SDK Python user module. Python3 is required for Azure IoT SDK Python to work – it is the separated module and it can be used as a standalone Python3 for other purposes.

azure_iot_sdk_python_v2.v4.tgz | 821 KB V4

Azure_IoT_SDK_Python_Application_note_20220307.pdf | 1 MB

Allow users to specify at least Primary and Backup APN for the first SIM card and switch between them in case that connection failed or connection is not established in specified time.

backup_apn.v4.tgz | 11 KB V4

Backup_APN_Application_Note_20220901.pdf | 924 KB

Allows user to restrict the portfolio of frequency bands that are supported by our routers.

bandsel.v4.tgz | 27 KB V4

BandSelect_Application_Note_20220901.pdf | 927 KB

With Bondix S.A.NE Enterprise two or more WAN connections can be aggregated to achieve higher bandwidth as well as higher availability.
The Bondix S.A.NE Enterprise uses bonding technology to optimize the speed and latency overall connections.

https://www.lucom.de/bondix-advantech.html  V2V3V4V2i

Provides a service called captive portal on routers. Landing page, QoS and monitoring of users on WiFi interface.

captive_portal.v4.tgz | 694 KB V4

WelcomePageExample.tar.gz | 12 KB V2V3V4V2i

Captive_Portal_Application_note_20220901.pdf | 1 MB

Agent for Cumulocity IoT cloud platform.

cumulocity.v4.tgz | 1 MB V4

Cumulocity_Agent_Application_note_20220901.pdf | 2 MB

Command line tool and library for transferring data with URLs. This is part of our FW since version 5.0.0!

curl.v4.tgz | 862 KB V4

This module allows the user to change the logo displayed in the header of the web interface. This user module is supported by firmware 6.2.0 or later and is not supported by routers of the v2 platform.

customerlogo.v4.tgz | 10 KB V4

Customer_Logo_Application_Note_20220901.pdf | 812 KB

Configurable daily router reboot.

dailyReboot.v4.tgz | 10 KB V4

DailyReboot_Application_note_20220901.pdf | 885 KB

Allows only OUI in MAC field in router's DHCP configuration.

dhcpMacOui.v4.tgz | 12 KB V4

Docker is an open platform for developing, shipping, and running applications. Docker provides the ability to package and run an application in a loosely isolated environment called a container. This UM is compatible with FW 6.3.2 and newer.

docker.v4.tgz | 64 MB V4

Docker_Application_Note_20220901.pdf | 2 MB

Ethernet Mirroring is used for port mirroring to monitor and analyze the incoming and outgoing traffic during RTU P2P test and trouble shooting. This UM is compatible with FW 6.1.8 and newer.

eth_mirror.v4.tgz | 11 KB V4

Ethernet_Mirroring_Application_Note_20220901.pdf | 930 KB

Using this module, it is possible to send notifications (change of configuration, password change, login failed and much more) by e-mail or SNMP trap for various events. It is a useful tool to increase the security level of the system.

event_notificator.v4.tgz | 19 KB V4

Event_Notificator_Application_Note_20220901.pdf | 916 KB

Adds the ability to create ext4 file systems, check them and mount them. This user module is intended only for v3 or v4 routers with FW 5.3.4 or newer.

ext4_tools.v4.tgz | 540 KB V4

Ext4_tools_Application_note_20220901.pdf | 873 KB

Periodic sending System log and Report files to the selected email address or FTP server.

fileUploader.v4.tgz | 894 KB V4

File_Uploader_Application_note_20220901.pdf | 1 MB

Firmware Over-The-Air (FOTA) user module allows routers to wirelessly upgrade and update the operating firmware of a cellular module. The module's primary purpose is to update cellular module firmware for security or functional reasons. See the application note below for supported cellular modules and firmware available on the Advantech FOTA server.

fota.v4.tgz | 247 KB V4

FOTA_Application_Note_20220901.pdf | 910 KB

FRRouting (FRR) user module is an Internet routing protocol suite for Advantech routers. This UM includes protocol daemons for BGP, IS-IS, LDP, OSPF, PIM, RIP, MPLS, LDP and VRF.

frr.v4.tgz | 5 MB V4

FRR_Application_Note_20220901.pdf | 999 KB

GPS/GNSS receiver support.

gps.v4.tgz | 190 KB V4

GPS_Application_note_20220901.pdf | 999 KB

Allows users to embed information banner ahead of the login form.
Please note: This functionality is now part of the firmware - from version 6.3.7.

httpBanner.v4.tgz | 506 KB V4

HTTP_Banner_Application_note_20220901.pdf | 882 KB

Layer-2 protocols in a pseudo-wire configuration.

l2tpPseudowire.v4.tgz | 12 KB V4

Allows filtering based on defined list of MAC addresses.

l2fw.v4.tgz | 10 KB V4

Layer_2_Firewall_Application_Note_20220901.pdf | 890 KB

Virtual interface for management. 

loopback.v4.tgz | 10 KB V4

Loopback_Application_Note_20220901.pdf | 905 KB

Supports scripting language that combines simple procedural syntax with powerful data description constructs based on associative arrays and extensible semantics.

lua.v4.tgz | 264 KB V4

lualibmodbus.v4.tgz | 76 KB V4

Provides seamless communication between Modbus/TCP devices and MQTT device.

mb2mqtt.v2_2.0.19_20230201T053911Z.tgz | 1017 KB V2V3V4V2i

Message broker based on Mosquitto project. It supports MQTT protocol versions 5.0, 3.1.1 and 3.1.

mqttbroker.v4.tgz | 835 KB V4

Controlling and monitoring Advantech routers via the MQTT protocol. It is possible to send through a specific MQTT message which can, for example, change binary output. User can track status of the router by subscribing to a specific topic.

mqttmgr.v4.tgz | 683 KB V4

MQTT_Manager_Application_Note_20220905.pdf | 1 MB

Extends NAT configuration options by SNAT (Source NAT) and DNAT (Destination NAT). There is 32 + 32 NAT rules.

nat.v4.tgz | 15 KB V4

User module NetFlow/IPFIX is determined for monitoring network traffic. NetFlow enabled routers have a probe that collects IP traffic information and submits them to a NetFlow collector and analyzer.

netflow.v4.tgz | 588 KB V4

NetFlow-IPFIX_Application_Note_20220905.pdf | 1 MB

This user module provides TCP and UDP scan.

nmap.v4.tgz | 1 MB V4

NMAP_Application_note_20220907.pdf | 1 MB

Node-RED is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways. This Router App contains Node-RED with some additional useful comon nodes. Other specialized nodes you can find in separated Router Apps.

Node-RED requires installed Node.js.

nodered.v4.tgz | 9 MB V4

Node_RED_Application_Note_20221027.pdf | 8 MB

Adds a support for the AWS cloud to Node-RED. You will have the complex set of nodes for all Amazon cloud services after instalation. For detailed description see the Node-RED Application Note above.

noderedaws.v4.tgz | 2 MB V4

Adds a support for the Azure IoT platform to Node-RED. It can connect to Azure IoT Hub, Azure IoT Central and use Azure IoT Edge as a transparant gateway. For detailed description see the Node-RED Application Note above.

noderedazure.v4.tgz | 2 MB V4

Adds a support for the Bluetooth to Node-RED. You can scan BLE devices and read/write their service characteristics. For detailed description see the Node-RED Application Note above.

noderedbt.v4.tgz | 430 KB V4

Adds a support for the Dashboard to Node-RED. You can create GUI for your flow with this node. For detailed description see the Node-RED Application Note above.

nodereddashboard.v4.tgz | 3 MB V4

Adds a support for the dnp3 protocol to Node-RED. Router can work as a dnp3 outstation with the datapoints and control commands support. For detailed description see the Node-RED Application Note above.

nodereddnp3.v4.tgz | 649 KB V4

Adds a support for the filesystem opearations: copy, move, create link, remove, make dir, list, stats, test access. For detailed description see the Node-RED Application Note above.

noderedfs.v4.tgz | 429 KB V4

Adds a support for the FTP and SFTP protocols to Node-RED. You can do the basic commands LIST, GET, PUT, DELETE and MKDIR on a FTP or SSH server with this node. For detailed description see the Node-RED Application Note above.

noderedftp.v4.tgz | 273 KB V4

Adds a support for the GNSS to Node-RED. GPSd node receives the GNSS events as payload via gpsd daemon. You can filter which events you are interested in. For detailed description see the Node-RED Application Note above.

noderedgpsd.v4.tgz | 8 KB V4

Adds a support for the gzip compression to Node-RED. This node compresses an open node payload or decompress a compressed node payload by gzip compression. For detailed description see the Node-RED Application Note above.

noderedgzip.v4.tgz | 259 KB V4

Adds a support for the KNX protocol to Node-RED. Included nodes give you the control over your KNX intallation. For detailed description see the Node-RED Application Note above.

noderedknx.v4.tgz | 737 KB V4

Adds a support for the OMA Lightweight M2M protocol to Node-RED. It is intended for machine to machine (M2M) or Internet of things (IoT) device management and access to the device services. For detailed description see the Node-RED Application Note above.

noderedlwm2m.v4.tgz | 557 KB V4

Adds a support for the Modbus protocol to Node-RED. Both protocol varianst TCP and RTU are supported. Your roter can act as both client (Modbus master) and the server (Modbus slave). For detailed description see the Node-RED Application Note above.

noderedmodbus.v4.tgz | 547 KB V4

Adds a support for the OPC UA protocol to Node-RED. Your router can act as both a client and a server with these nodes. For detailed description see the Node-RED Application Note above.

noderedopcua.v4.tgz | 3 MB V4

Adds a support for the PLC EtherNet/IP protocol to Node-RED. Your flow can communicate with the Allen Bradley/Rockwell PLCs over Ethernet with these nodes. For detailed description see the Node-RED Application Note above.

noderedplcethip.v4.tgz | 48 KB V4

Adds a support for the PLC Melsec protocol to Node-RED. Your flow can communicate with the Mitsubishi PLCs over Ethernet with these nodes. For detailed description see the Node-RED Application Note above.

noderedplcmc.v4.tgz | 42 KB V4

Adds a support for the Splunk cloud to Node-RED. Allows to publish a node payload to Splunk's HTTP Event Collector. For detailed description see the Node-RED Application Note above.

noderedsplunk.v4.tgz | 234 KB V4

Node.js is a JavaScript runtime built on Chrome's V8 JavaScript engine. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient.

nodejs.v4.tgz | 11 MB V4

node.js_application_note_20220907.pdf | 963 KB

npm is an official tool for the Node.js node management. Advantech provides this tool but provides no support for the nodes installed via this tool. There are some limitations and risks of using this tool on embeded routers. Please read carefully the chapter 4.5 in Node-RED Application Note before use it.

npm.v4.tgz | 2 MB V4

Time synchronization using NTP version 4 protocol. The module includes support for client and server operations as detailed in IETF RFC 5905.

ntp.v4.tgz | 575 KB V4

NTPv4_Application_Note_20220907.pdf | 879 KB

OpenVPN Custom Config user module can be used to configure up to four another OpenVPN tunnels on the router.

openvpn_custom_config.v4.tgz | 11 KB V4

OpenVPN_Custom_Config_Application_note_20220908.pdf | 983 KB

Duplicates data flow to more targets (up to seven different connections).

packetSplitter.v4.tgz | 20 KB V4

Packet_Splitter_Application_note_20220908.pdf | 1 MB

Allows to send SMS messages longer than standard of 160 characters.

pduSMS.v4.tgz | 11 KB V4

pduSMS_Application_note_20220908.pdf | 924 KB

Automatically verifies functionality of the connection between the router and a peer device and collects statistics on this connection. Also provides the ping and traceroute tools in the web UI.

pinger.v4.tgz | 34 KB V4

UM-PINGER-MIB.my | 5 KB V2V3V4V2i

Pinger_Application_Note_20220908.pdf | 2 MB

PLMN Whitelist allows user to edit preferred PLMN lists on SIM card.

plmnWhitelist.v4.tgz | 15 KB V4

Adds support of the BGP routing protocol which allows to route between autonomous systems.

bgp.v4.tgz | 467 KB V4

Protocol_BGP_Application_note_20220908.pdf | 1 MB

Adds support of the IS-IS routing protocol. The IS-IS is a link state protocol which means that information about the topology is exchanged between the nearest neighbours in a flood way (flooding).

isis.v4.tgz | 352 KB V4

Protocol_IS-IS_Application_note_20220908.pdf | 957 KB

Converts serial protocol Modbus RTU to Modbus TCP, routers I/Os can act like Modbus slave device.

tcp2rtu.v4.tgz | 37 KB V4

Protocol_Modbus_TCP2RTU_Application_note_20220909.pdf | 845 KB

The Next Hop Resolution Protocol (NHRP) plays a role in Dynamic Multipoint Virtual Private Network. A limitation of NHRP is its inability to improve multicast protocols.

nhrp.v4.tgz | 71 KB V4

DMVPN_Application_Note_20221004.pdf | 1 MB

Adds support of the OSPF routing protocol. The OSPF is a link state protocol which means that routers maintain a map of the network (link state database) that is updated after any change to the network topology.

ospf.v4.tgz | 406 KB V4

Protocol_OSPF_Application_note_20220927.pdf | 1 MB

Adds support of the PIM-SM multicast routing protocol.

pimSM.v4.tgz | 66 KB V4

Protocol_PIM-SM_Application_note_20220927.pdf | 995 KB

Adds support of the RIP routing protocol. The RIP is a distance-vector protocol which means that routers do not know the entire network topology.

rip.v4.tgz | 308 KB V4

Protocol_RIP_Application_note_20220927.pdf | 1 MB

Supports programming language Python 2.x. This UM requires at least 8 MB of free space for installation "Router Apps". 

python.v4.tgz | 5 MB V4

Supports programming language Python 3.x. This UM requires at least 8 MB of free space for installation "Router Apps".

python3.v4.tgz | 30 MB V4

Supports programming language Python 3.x with pip (tool for installing and managing software packages written in Python). This UM supports only packages that does not require any additional compilation. It is required at least 10 MB of free space for installation "Router Apps".

python3_with_pip.v4.tgz | 32 MB V4

Windows Share (samba) on the Router for directory /var/data/samba. The UM also supports NetBIOS nameserver.

samba.v4.tgz | 6 MB V4

The Scailable AI Manager turns your gateway into a state of the art Artificial Intelligence device. Connect up to 4 cameras to your gateway, and start benefiting from edge AI today. With our extended model library, you can use your gateway to accurately locate people, monitor occupancy of your parking-lot, do entrance control, and much more. And if that’s not enough, you can add your own AI models effortlessly.

https://www.scailable.net/routerapp  V3V4

SCEP is a PKI communication protocol. The goal of SCEP is to support the secure issuance of certificates to network devices in a scalable manner, using existing technology whenever possible.

scepClient.v4.tgz | 515 KB V4

SCEP_Client_Application_note_20220927.pdf | 974 KB

The module implements an enhanced syslog client (sender) that can forward syslog messages to a server (receiver) over a secure TLS protocol as defined in RFC 5425.

secure_syslog.v4.tgz | 1 MB V4

SecureSyslog_Application_Note_20220927.pdf | 1001 KB

Service Access Limitation of HTTP, FTP, SSH... on particular interfaces.

service_acl.v4.tgz | 12 KB V4

Switch the router into Low Power Mode and wake it up. Advanced options based on binary inputs and time.

sleepmode.v4.tgz | 14 KB V4

Sleep_Mode_Application_Note_20220927.pdf | 773 KB

Creates an encrypted network tunnel. Encryption data is wrapped in SSL.

stunnel.v4.tgz | 1 MB V4

Stunnel_Application_note_20220927.pdf | 1 MB

Check of the TCP connection with a defined IP address.

tcpsynka.v4.tgz | 12 KB V4

TCP_SYN_Keep-Alive_Application_note_20220927.pdf | 910 KB

An application layer protocol for remote router monitoring and management.

tr_069.v4.tgz | 2 MB V4

TR-069_Application_Note_20220927.pdf | 2 MB

Mobile WAN IP address is transferred to connected device on ETH (router is invisible from WAN side).

transparentMode.v4.tgz | 2 KB V4

TransparentMode_Application_note_20220927.pdf | 1 MB

Checks the specific UDP packet responses in Smart Router and if no responses come back, switches the PPP (cellular) connection to other SIM card in the Smart Router.

udp_watchdog.v4.tgz | 13 KB V4

UDP_Communication_Watchdog_Application_Note_20220927.pdf | 994 KB

This user module can be used for blocking specific URLs on WiFi interface.

url_blocker.v4.tgz | 188 KB V4

URL_Blocker_Application_Note_20220927.pdf | 950 KB

Integrates Eltima libraries into USB over Ethernet solution. This Router App is only supported by firmware 6.3.5 or newer.

usbip_electronic_team.v4.tgz | 4 MB V4

USB over IP (Electronic Team)_Application_Note_20221004.pdf | 1 MB

Universal UM for USR LED control - indication of various status informations.

usrled_mgmt.v4.tgz | 13 KB V4

USR_LED_Management_Application_Note_20221004.pdf | 2 MB

Connects the router to WebAccess/VPN (VPN Portal), see WebAccess/VPN Software product page.Note for compatibility: always use the same version of user module in router and server version of WebAccess/VPN.

vpnportal.um.v4.tgz | 482 KB V4

This user module allows executing of shell commands on a router over standard HTTP(S) connection.

webTerm.v4.tgz | 33 KB V4

Web_Terminal_Application_Note_20221004.pdf | 944 KB

Client that runs inside Advantech routers, to enable them to connect with WebAccess/DMP. Read the Release Notes/Changelog in WebAccess/DMP Documentation.

wadmp_client.v4.tgz | 587 KB V4

WebAccess-DMP_Client_Application_Note_20221004.pdf | 949 KB

Transparent mode (WiFi interface in client mode bridged to ETH).

wifi_relay.v4.tgz | 29 KB V4

WiFi_STA_Relay_Application_Note_20221004.pdf | 977 KB

This is UM can be used as a SW agent for Advantech routers to support Zabbix network monitoring platform.

zabbix_agent.v4.tgz | 953 KB V4

zbx_conel_templates.xml | 59 KB V2V3V4V2i

Zabbix_Integration_Guide_Application_Note_20221004.pdf | 2 MB